dim. in mm r rr r drawn this drawing may not be copied or reproduced in any way, and may not be passed on to a third party without written permission. ownership and copyright of conec gmbh appd. title: dwg no: part no: name date d o n o t a l t e r c a d d r a w i n g b y h a n d 42k1a281 petker 23.11.10 23.11.10 mickenbecker male connector m8x1, field attachable, axial, spring-type termination see table index: d 10.08.2011 k.h. ?4071 rated volltage and current rating updated d i r e c t i v e 2 0 0 2 / 9 5 / e c r o h s c o m p l i a n t 3 pos 4 pos description: sal - 8 - rsc3 - k cable- n : 4 - 5,5mm sal - 8 - rsc4 - k 4 - 5,5mm part no: 42-00001 42-00003 pos: 34 width across flats 12 width across flats 13 max. external cable diameter see table n 13,7 n 14 ( r e f . 4 7 ) 4 3 1 4 3 2 1 technical specification: rated voltage: iec 61076-2-104 current rating: iec 61076-2-104 insulation resistance: iec 60512 pollution degree: iec 60664-1 degree of protection: iec 60529 temperature range: iec 60664-1 mating cycles: iec 60512-9a wire cross section: 3pos 4pos 60 v 30 v 3 a at 40c >= 100 m 3/2 ip 67, in mated condition -30c ... +85c >= 100 0,14mm2 - 0,34mm2 awg 26 - 22 materials: contact: contact plating: contact carrier: cable sealing: o-ring: coupling nut: housing: cuzn au over ni in mating area pa6 gf, ul 94 nbr silicone die cast, nickel plated pa6 gf, ul 94 installation specification: recommended torque: conec installation tool: 0,4 nm torque wrench: 36-000200 insert across flats 13: 36-000220
|